Stop the Splash: 360° Swivel Kitchen Faucet Aerator, 3 Spray Modes

The sink splashes your shirt every time you rinse a bowl. The stream hits a spoon at the wrong angle and sprays the counter. You end up wiping down the backsplash more often than you actually cook. This swivel aerator screws onto the end of your faucet and hands you back control: point the water where you want it, flip between a soft stream and a wide spray, and get on with the dishes.

What It Fixes

• Splash-back on your shirt and counter. The stainless steel outlet screen breaks the flow into a softer, aerated stream instead of a hard jet.
• Water that only goes one direction. The head swivels a full 360 degrees, so you can aim into the corners of the sink, into a tall pot, or straight down.
• One-flow-fits-nothing faucets. A slide switch on the head gives you a soft aerated stream, a wide shower spray for rinsing produce and dishes, or a mixed spray.
• Drips at the connection. Two rubber washers are included to help seal the thread and cut down on leaks.

How It Works

1. Unscrew your faucet's existing aerator by hand (or with a cloth for grip) and check that your faucet has a standard household thread.
2. Seat a rubber washer and screw the swivel head on snugly, then run the water and check for drips.
3. Slide the switch to pick your spray mode and tilt or rotate the head to aim it.

What's Included

• 1 × 360° swivel faucet aerator head with slide-switch spray selector
• 2 × rubber sealing washers
• Size: about 3.2 × 2.1 in (80 × 55 mm), 2.6 oz
• Chrome-plated body with stainless steel outlet screen

Why This One

This is a small, inexpensive part that does one job well: it makes an ordinary faucet more useful. It installs by hand in about a minute, needs no tools or plumber, and unscrews just as easily if you move or want your original aerator back. One thing to know: the housing is a plastic body finished with chrome plating, not solid metal, with a stainless steel screen at the outlet. It's a practical upgrade at a practical price, not a heirloom fixture.

Specifications

• Size: about 3.2 x 2.1 inches (80 x 55 mm), 2.6 oz
• Weight: 2.6 oz
• Included: 1 faucet aerator head, 2 rubber washers
• Measure first: compare these numbers to your space before ordering. If it does not fit, our 30-day money-back guarantee covers you.

FAQ

Will it fit my faucet?

It screws onto a standard household faucet thread. Faucet threads do vary, so unscrew your current aerator and check your thread size and type (male or female) before ordering. Pull-down sprayer heads and some designer or commercial faucets use non-standard fittings and may not accept it.

Is it two modes or three?

Three settings on the slide switch: a soft aerated stream, a wide shower spray, and a mixed spray.

What if it drips where it connects?

Most drips come from a loose fit or a missing washer. Two rubber washers are included, make sure one is seated flat in the connection, then hand-tighten until snug. Don't over-torque it with pliers.

Save as a kit: the Water Fix Kit pairs this aerator with the filtered high-pressure shower head for less than the two bought separately.